Loading ...
Loading ...
Loading ...
Tire repair kit
For emergencies 8-7
8
1. Park the vehicle on a safe, flat and level
place.
2. Set the parking brake firmly.
3. Move the selector lever to the “P”
(PARK) position and turn the electric
motor switch to the “LOCK” position.
4. Turn on the hazard warning flashers and
set up a warning sign, such as a warning
triangle or flashing signal lamp, at an ade-
quate distance from the vehicle, and have
all your passengers leave the vehicle.
5. Take out the tire repair kit.
6. Take the valve cap (D) off the tire valve
(E), then press the valve remover (F) onto
the valve as illustrated. Allow all of the
air in the tire to escape.
7. Remove the valve insert (G) by turning it
counterclockwise using the valve remover
(F). Put the removed valve insert in a
clean place so it does not get dirty.
WARNING
The tire sealant can cause health damage
if swallowed. If you accidentally swallow
it, drink as much water as possible and
immediately seek medical attention.
If the tire sealant gets in your eyes or on
your skin, rinse it away with lots of water.
If you still sense an abnormality, seek
medical attention.
Consult a doctor immediately if any aller-
gic reactions occur.
Do not allow children to touch the tire
sealant.
CAUTION
If the vehicle body is contaminated by the
tire sealant, wipe the tire sealant off immedi-
ately with a wet cloth.
Immediately wash clothes contaminated with
tire sealant.
NOTE
Do not pull out an object, such as a nail or
screw, that penetrates the punctured tire.
Move the vehicle so that the tire valve is
positioned away from the point where the
tire touches the ground. If the valve is near
the point where the tire touches the ground,
the sealant may not enter the tire easily.
BK0220401US.book 7 ページ ２０１５年６月３日 水曜日 午前７時４２分
Loading ...
Loading ...
Loading ...