Loading ...
Loading ...
Loading ...
Regular charging (charging method with rated AC 120 V outlet)
3-20 General information/Charging
3
10. Make sure that the charging indicator on
the instrument cluster is illuminated.
If the charging indicator is not illumi-
nated, charging will not start.
Make sure that the regular charge port, the
plug and the connector are correctly con-
nected, and perform charging from Step 5
again.
11. Charging is complete when the charging
indicator turns off. Pull out the regular
charge connector while pressing the but-
ton (M).
CAUTION
Do not clasp the top of regular charge con-
nector. It could cause injury to from the pro-
trusion on the lid.
NOTE
If the electric motor switch is turned to the
“START” position with the regular charge
connector connected to the regular charge
port, the electric motor unit cannot be
started.
K
Do not connect or disconnect the regular
charge connector repeatedly in a short time
period. You may experience difficulty charg-
ing your vehicle.
NOTE
When the regular charge connector is con-
nected to the regular charge port, the charg-
ing indicator is blinking. When charging is
started, the charging indicator is illuminated.
NOTE
The charge level for main drive lithium-ion
battery can be checked with the energy level
gauge (L) on the instrument cluster.
Refer to “Energy level gauge” on page 5-41.
You may hear operating sounds from the
main drive lithium-ion battery cooling sys-
tem, such as sounds from the cooling fan and
air conditioning compressor, during regular
charging. This is normal.
NOTE
L
M
BK0220401US.book 20 ページ ２０１５年６月３日 水曜日 午前７時４２分
Loading ...
Loading ...
Loading ...