Loading ...
Loading ...
Loading ...
Replacement of light bulbs
Vehicle care and maintenance 9-21
9
Some fuses may not be installed on your
vehicle, depending on the vehicle model
or specifications.
The table above shows the main equip-
ment corresponding to each fuse.
N00901100078
N00954900115
1. Before replacing a fuse, always turn off
the electrical item connected to the fuse
and turn the electric motor switch to the
“LOCK” position.
2. Remove the fuse puller (A) from the
inside of the fuse cover in the passenger
compartment.
3. Clamp it on the fuse you wish to remove,
and pull the fuse straight out from the fuse
block.
4. Use the fuse location diagrams and their
corresponding tables, to check the fuse
that is related to the problem. If the fuse is
not blown, something else must be caus-
ing the problem.
Contact a certified i-MiEV dealer to have
the problem checked.
5. Insert a new fuse of the same capacity
securely into the appropriate slot.
N00942900336
Before replacing a bulb, be sure the light is
off. Do not touch the glass part of the new
Identification of fuse
Capacity Color
7.5 A Brown
10 A Red
15 A Blue
20 A Yellow
30 A
Green (fuse type) /Pink (fusible
link type)
40 A Green (fusible link type)
Fuse replacement
B- Fuse is OK
C- Blown fuse
CAUTION
Never use a fuse with a capacity greater than
the one listed or any substitute, such as wire,
foil etc. This would cause the circuit wiring
to heat up and could cause a fire.
If the replacement fuse blows again after a
short time, have the electrical system
checked by a certified i-MiEV dealer to find
and correct the cause.
Replacement of light bulbs
BK0220401US.book 21 ページ ２０１５年６月３日 水曜日 午前７時４２分
Loading ...
Loading ...
Loading ...