Loading ...
Loading ...
Loading ...
AM/FM electronically tuned radio with CD player (if so equipped)
7-14 Comfort controls
7
N00735000913
1. Press the POWER button until it beeps to
turn the audio system ON and OFF. The
system turns on in the last mode used.
Press the RADIO button to turn ON the
radio.
2. Press the RADIO button to select the
desired band (AM/FM1/FM2).
3. Press the SEEK button to tune to a station,
or press the MEMORY button either
or to tune in to a station memorized.
Refer to “Automatic tuning”, “Manual
tuning” or “To enter frequencies into the
memory”.
After pressing the SEEK button, a receivable
station will be automatically selected and
reception of the station will begin.
Press the SCAN button. The radio will tune
consecutively to each available station for
about 5 seconds per station. If you want to
stop scanning, press the SCAN button again.
The frequency display of the current station
flashes once per second during SCAN.
The frequency changes every time the SEEK
button is pressed.
Press the button to select the desired station.
As many as 6 AM and 12 FM stations can be
entered into the memory.
To store a frequency in the memory, follow
these steps:
1. Press the SEEK button to tune to the fre-
quency you wish to keep in the memory.
2. Press the MEMORY button either or
until it beeps.
The sound will be momentarily inter-
rupted while the frequency is being
entered into the memory.
3. To recall a frequency that has been saved
in memory, press the MEMORY button
briefly for no longer than about 1 second.
To listen to the radio
Automatic tuning
SCAN function
Manual tuning
To enter frequencies into the mem-
ory
NOTE
Disconnecting the 12V starter battery cables
erases all the radio station settings stored in
the memory.
BK0220401US.book 14 ページ ２０１５年６月３日 水曜日 午前７時４２分
Loading ...
Loading ...
Loading ...