Loading ...
Loading ...
Loading ...
Regular charging (charging method with rated AC 120 V outlet)
General information/Charging 3-21
3
12. Close the inner lid and close the regular
charging lid.
13. Remove the charging cable plug from the
outlet.
14. Install the cap on the regular charge con-
nector.
N01202501047
You cannot charge the main drive lithium-ion
battery when the main drive lithium-ion bat-
tery temperature is -13 °F (-25 °C) or lower.
The air conditioning will automatically oper-
ate and the main drive lithium-ion battery
will be heated when all the following condi-
tions are met.
The energy level gauge (A) in the instrument
cluster and charging indicator (B) illuminate
while the main drive lithium-ion battery
warming system is operating.
The main drive lithium-ion battery warming
system will automatically stop when the main
drive lithium-ion battery temperature is -4°F
(-20°C) or higher.
WARNING
After charging, disconnect the charge con-
nector completely from the regular charge
port. If the charge connector remains par-
tially engaged with the latch unlocked, the
electric motor switch can be turned to the
“START” position and the vehicle can be
moved.
NOTE
Charging can be stopped half way. In this
case, pull out the regular charge connector
while pressing the button.
WARNING
After charging, be sure to close the inner
lid and the regular charging lid com-
pletely.
Be careful that water or dust does not
enter in the regular charge port inner lid
and regular charge connector.
Entry of water or dust could cause electric
leakage, resulting in a fire or electric
shock.
NOTE
Make sure that the inner lid is completely
closed before closing the regular charging
lid.
If the regular charging lid is forcibly closed
without completely closing the inner lid, the
hinge on the inner lid may be broken.
Main drive lithium-ion battery
warming system
• The main drive lithium-ion battery tem-
perature is between -22 °F (-30 °C) and
-13 °F (-25 °C).
• The energy level gauge shows 4 bars or
more of full charge.
• The electric motor switch is in the
“LOCK” position.
• The regular charge connector is con-
nected to the regular charge port.
A
B
BK0220401US.book 21 ページ ２０１５年６月３日 水曜日 午前７時４２分
Loading ...
Loading ...
Loading ...