Loading ...
Loading ...
Loading ...
Electronic immobilizer (Anti-theft starting system)
5-4 Features and controls
5
If you choose to have a certified i-MiEV
dealer register the ID code, take your vehicle
and any remaining keys to a certified i-MiEV
dealer.
N00562200113
You can program new keys to the system if
you have two valid (already registered) keys
and blank (not registered) immobilizer key
(specially cut for your vehicle at a certified i-
MiEV dealer) by doing the following:
1. Insert the first valid key into the ignition
and turn the ignition to the “ON” position
for 5 seconds.
2. Turn the ignition to the “LOCK” position
and remove the first key.
3. Within 30 seconds of turning the first key
to the “LOCK” position, insert the second
valid key into the ignition and turn it to
the “ON” position. About 10 seconds
later, the immobilizer indicator will start
blinking.
4. When the immobilizer indicator starts
blinking, turn the second valid key to the
“LOCK” position and remove it. Within
30 seconds after doing so, insert a blank
immobilizer key into the ignition and turn
it to the “ON” position. Perform this oper-
ation no more than 30 seconds after the
immobilizer indicator starts blinking.
When registration of the ID code is com-
plete, the immobilizer indicator will come
on for 3 seconds then go off. If an error
occurs, the immobilizer indicator will go
off during the procedure.
5. If you wish to register another key, per-
form the process again from step 1.
N00562300084
Your electronic immobilizer operates on a
radio frequency subject to Federal Communi-
cations Commission (FCC) Rules (For vehi-
cles sold in U.S.A.) and Industry Canada
Rules (For vehicles sold in Canada). This
device complies with Part 15 of the FCC
Rules and RSS-Gen of the Industry Canada
NOTE
You are provided with 2 keys, but you may
add up to 6 more keys.
Customer key programming
(Except for vehicles sold in
Canada)
NOTE
It is not possible to register a key if:
• the immobilizer indicator goes off during
the procedure
• the immobilizer indicator does not come on
for 3 seconds after turning the ignition to
the “ON” position with a blank immobilizer
key
The procedure will be terminated automati-
cally if:
• a period of 30 seconds or longer elapses
from the moment when the first key is
turned to the “LOCK” position to the
moment when the second key is turned to
the “ON” position
• a period of 30 seconds or longer elapses
from the moment when the second key is
turned to the “LOCK” position to the
moment when the blank immobilizer key
(specially cut for your vehicle at a certified
i-MiEV dealer) is turned to the “ON” posi-
tion
• more than 20 seconds elapse after the
immobilizer indicator starts blinking
General information
NOTE
BK0220401US.book 4 ページ ２０１５年６月３日 水曜日 午前７時４２分
Loading ...
Loading ...
Loading ...