Loading ...
Loading ...
Loading ...
Keyless entry system
Features and controls 5-7
5
If you choose to have a certified i-MiEV
dealer register the ID code, take your vehicle
and all remaining keys to a certified i-MiEV
dealer.
N00546100101
Your keyless entry system operates on a radio
frequency subject to Federal Communica-
tions Commission (FCC) Rules (For vehicles
sold in U.S.A.) and Industry Canada Rules
(For vehicles sold in Canada). This device
complies with Part 15 of the FCC Rules and
RSS-Gen of the Industry Canada Rules.
Operation is subject to the following two con-
ditions.
This device may not cause harmful inter-
ference.
This device must accept any interference
received, including interference that may
cause undesired operation.
N00544101133
1. Before replacing the battery, remove static
electricity from your body by touching a
metal grounded object.
2. With the Mitsubishi mark facing up, insert
the cloth-covered tip of a flat blade screw-
driver into the notch in the remote control
transmitter case and use it to open the
case.
3. Remove the remote control transmitter
from the remote control transmitter case.
Then, open the remote control transmitter
using the method described in step 2.
4. Remove the old battery.
5. Install a new battery with the + side (A)
down.
NOTE
You are provided with 2 remote control
transmitters, but you may register up to 4
remote control transmitters.
General information
CAUTION
Changes or modifications not expressly
approved by the manufacturer for compli-
ance could void the user’s authority to oper-
ate the equipment.
Procedure for replacing the
remote control transmitter bat-
tery
NOTE
Be sure to perform the procedure with the
Mitsubishi mark facing up. If the Mitsubishi
mark is not facing up when you open the
remote control transmitter case, the buttons
may come out.
BK0220401US.book 7 ページ ２０１５年６月３日 水曜日 午前７時４２分
Loading ...
Loading ...
Loading ...