Online Manual - Page 913

For PIXMA-MG7520. Series: MG7500 SERIES
Also, The document are for others Canon models: MG7500 SERIES

Loading ...
Loading ...
Loading ...
• The specified PDF file contains unprintable data. Some portions may not be
printed.
PDF file which contain lot of graphics or hi-resolution images may lose that data or stop before
printing is completed. In this case, print from the computer.
• The card is currently writable from PC. Set to [Not writable from PC].
The card slot is set to Writable from USB PC or Writable from LAN PC.
You cannot print from the memory card when the card slot is set to Writable from USB PC or
Writable from LAN PC. After writing on the memory card, select Not writable from PC in Read/
write attribute under Device user settings.
• Power was not turned off correctly the last time. Press the button when turning power off.
The power cord may have been unplugged last while the machine was still on.
Tap OK on the touch screen to dismiss the error.
Note
• See Notice for Unplugging the Power Cord for unplugging the power cord.
• Cannot connect to the server. Please wait a while and try again.
You cannot connect to the server due to some communication error. When you have tried to access a
photo sharing site, it is possible that your photos have been deleted.
Tap OK on the touch screen to dismiss the error, then try again after a while.
Error Regarding Automatic Duplex Printing Is Displayed
Check
See
Cannot Print Properly with Automatic Duplex Printing and take the
appropriate action.
Error Regarding the Power Cord Being Unplugged Is Displayed
The power cord may have been unplugged while the machine was still on.
Check the error message that appears on the computer, then click OK.
The machine starts printing.
See
Notice for Unplugging the Power Cord for unplugging the power cord.
Writing Error/Output Error/Communication Error
Check1
If the POWER lamp is off, make sure that the power plug is plugged in, then
turn the machine on.
While the POWER lamp is flashing, the machine is initializing. Wait until the POWER lamp stops flashing and
remains lit.
Check2
Make sure that the printer port is configured appropriately in the printer driver.
* In the following instructions, "XXX" signifies your machine's name.
913
Loading ...
Loading ...
Loading ...