Loading ...
Loading ...
Loading ...
Cannot Access to the Card Slot Because of Some Security
Settings on the Computer
Check1
Make sure that Read/write attribute in Device user settings under Device
settings is set to Writable from LAN PC.
Device user settings
Check2
Make sure that the memory card is inserted in the card slot.
Check3
To share the printer's card slot with multiple computers over a network, set Set
memory card sharing on Other settings in LAN settings under Device settings to
Enable.
LAN settings
Check4
Disable the Windows Firewall function, or open port 137:139 to allow
communication with the machine following the procedure below.
For information on other security software, refer to its instruction manual or manufacturer.
Important
•
If you disabled the firewall function, disconnect your network from the Internet. You can do this by
configuring your access point or router not to connect to the Internet or WAN.
•
To disable the Windows Firewall:
â—¦
If you are using Windows 8.1, Windows 8, or Windows 7:
1.
Select Windows Firewall as shown below.
â–
In Windows 8.1 or Windows 8, select Control Panel from the Settings charm on Desktop >
System and Security > Windows Firewall.
â–
In Windows 7, click Start > Control Panel > System and Security > Windows Firewall.
2.
Click Turn Windows Firewall on or off.
3.
Select Turn off Windows Firewall.
â—¦ If you are using Windows Vista or Windows XP:
1. Select items from the Start menu as shown below.
â–
In Windows Vista, click Start > Control Panel > Security > Windows Firewall > Change
settings.
â– In Windows XP, click Start > Control Panel > Security Center > Windows Firewall.
2.
Select Off and click OK.
•
To open port 137:139:
â—¦
If you are using Windows 8.1, Windows 8, or Windows 7:
1.
Select Windows Firewall as shown below.
â– In Windows 8.1 or Windows 8, select Control Panel from the Settings charm on Desktop >
System and Security > Windows Firewall.
â–
In Windows 7, click Start > Control Panel > System and Security > Windows Firewall.
809
Loading ...
Loading ...
Loading ...