Loading ...
Loading ...
Loading ...
135
Additional Information
, DTS audio signals on CDs and DVDs are output from the
DIGITAL OUT (OPTICAL/COAXIAL) jack. And set
[DTS] is set to [DTS] of [Audio Settings] in [Settings].
The sound is not output correctly.
, When the AV amplifier connected to the DIGITAL OUT
(OPTICAL or COAXIAL) jack or the HDMI OUT jack does
not support Dolby Digital signals, set [Dolby Digital] in
[Audio Settings] to [Downmix PCM] (page 114).
, When the AV amplifier connected to the DIGITAL OUT
(OPTICAL or COAXIAL) jack or the HDMI OUT jack does
not support DTS signals, set [DTS] in [Audio Settings] to
[PCM(BD-ROM)] (page 114).
, When the AV amplifier connected to the DIGITAL OUT
(OPTICAL or COAXIAL) jack does not support signals
recorded in 96 kHz frequency by its audio clock, set [48kHz/
96kHz PCM] in [Audio Settings] to [48kHz/16bit]
(page 114).
The sound output from the AUDIO OUT (L/R) or
LINE OUT AUDIO (L/R) jacks is distorted.
, Set [Audio Output ATT] in [Audio Setting] to [On]
(page 114).
No sound is output from the HDMI OUT jack
, The sound volume is low on some BDs/DVDs. The sound
volume may improve if you adjust the [Audio DRC]
setting in “BD/DVD Viewing Settings” (page 119).
, The HDMI OUT jack is connected to a DVI device (DVI
jacks do not accept audio signals).
The sound volume is low.
, On the Home Menu, select [Settings] – [Audio Settings], and
set [Audio Output ATT] to [Off] (page 114).
Operation
The server does not become operable after the
power is turned on. “E81XX” appears on the
front panel display.
, Check that two lock screws and a lock stick are removed
from the server's bottom (page 19).
Discs cannot be inserted.
, Check that two lock screws and a lock stick are removed
from the server's bottom (page 19).
, Dual discs are not supported.
, Do not place multiple discs on the disc tray at the same time.
Discs do not eject after Z is pressed.
, Additional operations are required. See page 33 for
procedures.
The remote does not function.
, The batteries in the remote are weak (page 27).
, There are obstacles between the remote and the server.
, The distance between the remote and the server is too far.
, The remote is not pointed at the remote sensor on the server.
The disc does not play.
, The disc is turned over. Insert the disc with the playback side
facing down.
, The disc is skewed.
, The server cannot play certain discs (page 148).
, The remote’s device selection is set for a device other than
SERVER.
, The region code on the BD/DVD does not match the server.
, Moisture has condensed inside the server (page 3).
, The server cannot play a recorded disc that is not correctly
finalized (page 149).
, See “About Removable Media and Recording Modes”
(page 148).
, Video CDs and Super Video CDs do not play on this server.
, The server is inclined (page 3).
The file name or contents information are not
correctly displayed.
, Mixed mode CDs do not play on the server. (If audio of a
music CD format multi-session CD is recorded in the first
session, only the first session will be played.)
, See “About Removable Media and Recording Modes” on
page 148.
The MP3 audio track file cannot be played
, The DATA DVD is not recorded in the MP3 format that
conforms to UDF (Universal Disk Format).
, The audio track file does not have the extension “.MP3.”
, The data is not formatted properly even though it has the
extension “.MP3.”
, The data is not MPEG-1 Audio Layer III data.
, The server cannot play audio tracks in mp3PRO format.
, BD-REs/BD-Rs is recorded in a format other than UDF 2.5.
, The CD is a mixed mode CD.
The LPCM audio track file cannot be played
, The DATA DVD is not recorded in the LPCM format that
conforms to UDF (Universal Disk Format).
, The audio track file does not have the extension “.WAV.”
, The data is not formatted properly even though it has the
extension “.WAV.”
, Characters other than numbers and English alphabet are
contained in the file name.
, Only audio track files of 44.1 kHz, 16 bit, and stereo, are
playable.
The file name or the content information are not
correctly displayed.
, The server can only display numbers and English alphabet.
Other characters may be displayed differently.
, Depending on the writing software used, the input characters
may be displayed differently.
Playback stops automatically.
, While playing discs with an auto pause signal, the server
stops playback at the auto pause signal.
Thumbnails do not appear.
, Thumbnails may not be created depending on the operation
status or the recorded content.
, Play the title once, stop playback, and try again.
(
page
69)
.
,continued
Loading ...
Loading ...
Loading ...