FDR-AX700 Help Guide

Loading ...

When movie recording and outputting images to an external device (HDMI output) are performed simultaneously, [NIGHTSHOT

LIGHT] is fixed to [OFF]. Also, when recording a movie with the [XAVC S 4K] 100Mbps setting or [XAVC S 4K] 60Mbps setting

and outputting images to an external device (HDMI output) are performed simultaneously, [LCD BRIGHT] is fixed to [NORMAL].

When the access lamp is lit or flashing in red, the camcorder is reading or writing data on the memory card. Do not shake or

apply strong force to the camcorder, do not turn the power off, and do not remove the memory card, battery pack, or the AC

Adaptor. The image data may be destroyed.

The LCD monitor of the camcorder can display recording images across the entire monitor (full pixel display). However, this may

cause slight trimming of the top, bottom, right, and left edges of images when played back on a TV which is not compatible with

full pixel display. It is recommended you record images [MARKER] - [SAFETY ZONE] set to [80%] or [90%] using the displayed

outer frame as a guide.

The menu settings, picture profile settings, and settings made using the AUTO/MANUAL switch are stored when you close the

LCD monitor and turn off the camcorder. The POWER/CHG (charge) lamp flashes while the settings are being stored.

Check the subject on the LCD monitor, and then start recording.

Hint

You can set the recording lamp not to turn on. Select [OFF] on

(OTHERS) - [REC LAMP].

Help Guide - Page 38