Loading ...
Loading ...
Loading ...
62
Auto sensor programs
This feature allows you to cook or reheat foods without entering the weight. The built-in
sensor measures the humidity of the food and calculates the recommended microwave
power level and/or combination setting together with a suggested cooking time. To allow
for some variations that occur in food, check that food is thoroughly cooked and piping hot
before serving. Please check carefully and adjust the cooking time if required, as would be
the case with a conventional cooking appliance.
How it works
Once the auto sensor program has been selected and start touched the food is heated up.
As food begins to get hot, steam is emitted. When the food reaches a certain temperature
and begins to cook, an even greater amount of steam is released. The increase in steam
emission is detected by a humidity sensor in the oven. This acts as a signal for the oven to
calculate how much longer the food needs to cook. The remaining cooking time will
appear in the display window after two beeps. Whilst the Sensor program is still in the
display window the oven door SHOULD NOT BE OPENED. Wait until the cooking time
appears in the window, and then open the door if required, to stir or turn the food.
Adjust to Taste
Preferences for degree of cooking vary for each individual. After having used auto sensor
programs a few times, you may decide you would prefer your food cooked to a different
degree of cooking. By using ‘’+/-‘’ the programs can be adjusted to cook food for a longer or
shorter time. After selecting the auto sensor program, tap ‘’+/-’’ or swipe the slider bar before
touching Start. The oven will automatically cook the food 10% more or 10% less.
example
Select desired
Auto Sensor
program. The food
category appears in
the window.
Touch Start. The food category
will be repeated in the display
window. Do not open the oven
door until 2 beeps sound and
cooking time appears in the
display Window.
Optional
()
IMPORTANT NOTE:
1. For best results the Sensor programs should only be used when the oven is cold. It is
recommended that the oven is allowed to cool between using the sensor programs, if
one or more programs are being used. If in a hurry, cook the food manually i.e. select
the correct power level and cooking time. It is not recommended to keep using the auto
sensor programs consecutively.
2. The sensor programs cannot be used when the oven is hot. If “HOT” appears in the
display window, when trying to set a Sensor program, do not touch Stop/Cancel. A fan
will automatically operate to cool the oven within 10-15 minutes, as long as the word
“HOT” is left in the display, otherwise cooling may take longer. If in a hurry, cook the
food manually, i.e. select the correct power level and cooking time.
F0003BH21BP_04_130820.indd 62F0003BH21BP_04_130820.indd 62 2013-8-20 9:21:492013-8-20 9:21:49
Loading ...
Loading ...
Loading ...