Loading ...
Loading ...
Loading ...
Instruments and warning/control lamps
Odometer
The od
omet
er
r
egist
ers the total distance
travelled by the car.
The partial odometer (trip) shows the dis-
tance travelled since the last time it was reset
to zero.
Vehicles with analogue instrument panel:
●
Briefly press the button
›
›
›
Fig. 7
4
4
to reset the trip recorder to 0.
●
Keep the button
4
pressed for
about 3 seconds and the pr
e
vious v
alue will
be displ
ayed.
V
ehicles with digital instrument panel:
●
Set the odometer to zero via the Infotain-
ment system or the multifunction steering
wheel
›››
page 74.
Speed warning for winter tyres
If the maximum speed set is exceeded, this is
displayed on the instrument panel
›››
page 74.
Speed warning settings can be changed in
the infotainment system, by pressing the info-
tainment button > Vehicle > SET-
TINGS > Driver assistance
›››
page 92.
Indications of the compass
Depending on the equipment, when the igni-
tion is on, the instrument panel display indi-
cates the direction in which you are driving
with a symbol, e.g. NW for Northwest.
When the Infotainment system is on and there
is no route guidance active, the graphic rep-
resentation of a compass is also shown.
Low consumption driving *
Depending on the equipment, when driving,
the display appears on the instrument
panel when the vehicle is in low consumption
status due to active cylinder management
(ACT
®
)*
›››
page 267.
Identifying letters on engine (LDM)
Vehicles with analogue instrument panel:
●
Switch the ignition on, but do not start the
engine.
●
Hold the button
›
›
›
Fig. 7
4
4
down
f
or mor
e than 15 seconds t
o displ
ay the iden-
tifying l
etters of the vehicle engine (MKB).
Copyright
Legal text about the property rights and
copyrights of the instrument cluster.
WARNING
Even when the outside temperature is high-
er than freezing temperat
ure, some roads
and bridges could be frozen.
●
The “ice crystal symbol” indicates that
there may be a risk of freezing.
●
At outside temperatures abo
ve +4 °C
(+39 °F), there may be ice even when the
“ice crystal symbol” is not on.
●
The outside temperature sensor takes a
guideline measurement.
Note
●
Ther
e are different instrument panel
s and
therefore the versions and instructions on
the display may vary. In the case of dis-
plays without warning or information texts,
faults are indicated exclusively by the con-
trol warning lamps.
●
Some indications on the instrument panel
screen may be concealed by a sudden
event, e.g. an incoming call.
●
Depending on the equipment, some set-
tings and instructions can be carried out or
displayed on the infotainment system as
well.
●
If there are several warnings at the same
time, the symbols will be displayed one af-
ter the other for a few seconds. The sym-
bols will stay on until you remove the
cause.
●
If when switching on the ignition warnings
are shown about existing faults, it might not
be possible to change the settings or show
the information as described. In this case,
go to a specialised workshop and request a
repair.
73
Loading ...
Loading ...
Loading ...