User Manual - Page 108

For LEON 2019.

Loading ...
Loading ...
Loading ...
Operation
on the door handle. The door should not
open.
The ne
xt time the door can only be unl
ock
ed
via the r
emot
e control or the lock cylinder.
The next time the door is locked/unlocked,
Keyless Access will be active again.
Convenience functions
To close all the electric windows and the sun-
roof using the comfort function, keep a fin-
ger for a few seconds on the locking sensor
surface
››
Fig. 100
B
(arrow) of the door
handl
e until the windo
ws and r
oof hav
e
cl
osed.
How the doors open when touching the sen-
sor surface on the door handle will depend
on the settings that have been activated in
the infotainment system, using the button
 > Vehicle > SETTINGS > Open-
ing and closing.
CAUTION
The sensor surfaces on the door handles
could engage if hit with a water jet or high
pressur
e steam if there is a valid vehicle
key in the proximity. If at least one of the
electric windows is open and the sensor
surface
››
Fig. 100
B
(arrow) on one of the
handles is activated continuously, all win-
dows will cl
ose.
Note
If the vehicle battery has little or no
char
ge, or the vehicle key battery is almost
or entirely out of charge, you will probably
not be able to lock or unlock the vehicle
with the Keyless Access system. The vehi-
cle can be unlocked or locked manually
››
page 110.
To control the proper locking of the vehi-
cle, the release function is disabled for ap-
prox. 2 seconds.
If the message Keyless access system
faulty is displayed on the screen of the
dash panel, abnormalities may occur in the
operation of the Keyless Access system.
Contact a specialised workshop. SEAT rec-
ommends visiting a SEAT dealership for
this.
Depending on the function set on the in-
fotainment system for the mirrors, the exte-
rior mirrors will unfold and the surround
lighting will come on when unlocking the
vehicle using the sensor surface on the
driver and passenger door handles
››
page 130.
If there is no valid key inside the vehicle
or the system fails to detect one, a warning
will display on the dash panel screen. This
could happen if any other radio frequency
signal interferes with the key signal (e.g.
from a mobile device accessory) or if the
key is covered by another object (e.g. an
aluminium case).
If the sensors are very dirty, e.g. have a
layer of salt, the correct functioning of the
sensors on the door handles may be affec-
t
ed. In this case, clean the vehicle.
If the vehicle is equipped with an auto-
matic gearbox, it may only be locked in the
gear stick is in position P.
To improve the safety of your vehicle, the
remote control of the system is equipped
with a position sensor. If this remote control
does not detect movement for a certain
length of time, the system will conclude
that the vehicle cannot be opened (e.g. on
a night table) so it will be disabled.
Locking system “Safe”
1)
When the vehicle is locked, the “Safe” securi-
t
y syst
em puts the door handl
es out of oper
a-
tion and mak
es it difficult for unauthorized
people to enter. The doors cannot be opened
from inside
››
.
Depending on the v
ehicl
e
, when s
wit
ching the
ignition off, a warning may be displayed on
the control panel screen stating that the
“Safe” security system is activated.
1)
Available depending on market and version.
106
Loading ...
Loading ...
Loading ...