User Manual - Page 255

For LEON 2019.

Loading ...
Loading ...
Loading ...
Start and driving
The batt
ery is t
oo l
o
w
.
High power consumption.
Additional information related to the auto-
matic gearbox
The engine stops when the selector lever is in
the positions P, D, N and S
1)
in addition to
when in Tiptronic mode. With the selector lev-
er in P, the engine will also remain switched
off when you take your foot off the brake
pedal. In order to start the engine up again
the accelerator must be pressed, or another
gear engaged or the brake released.
If the selector lever is placed in R while stop-
ped, the engine will start up again.
Change from D to P to prevent the engine
from accidentally starting when passing
through R.
Additional information about vehicles with
Adaptive Cruise Control (ACC)
In vehicles with ACC function, the engine will
start up again in certain operating conditions
if the radar sensor detects that the vehicle
ahead drives off again.
WARNING
Never switch the engine off until the v
ehi-
cle is stationary. The operation of the brake
and steering will not be fully guaranteed.
More force will be needed to turn the steer-
ing wheel or to brake. You could suffer an
accident and even serious injuries.
To avoid injury, make sure that the Start-
Stop system is switched off when working
in the engine compartment
››
page 254.
CAUTION
The Start-Stop system must always be
switched off when driving through flooded
ar
eas
››
page 269.
Note
In vehicles with an automatic gearbox,
you can contr
ol whether the engine should
switch off or not by reducing or increasing
the brake force applied. While the vehicle
remains stopped, the engine will not stop if
the brake pedal is slightly pressed, in traffic
jams with frequent stopping and starting
for example. As soon as strong pressure is
applied to the brake pedal, the engine will
stop.
When stopped, the brake pedal must be
kept pr
essed to ensure that the vehicle
does not move.
If the engine “stalls” with a manual gear-
box, it can be directly started up again by
immediately pressing the clutch pedal.
With an automatic gearbox, if the lever is
placed in position D, N or S after engaging
reverse gear, 10 km/h (6 mph) in a forwards
direction must be reached for the system to
be in a status to stop the engine.
1)
Except in the CUPRA model. In this case, when
you place the selector le
ver in the S position or in
the Tiptronic mode, the Start/Stop system will
prevent the engine from switching off.
253
Loading ...
Loading ...
Loading ...