Loading ...
Loading ...
Loading ...
Infotainment System
main screen will appear in the format selec-
t
ed in V
oice contr
ol settings
›
›
›
page 178).
The spoken indications guide you through the
following “dialogue”.
●
Speak the desired command and follow the
instructions in the “dialogue”. Often a func-
tion can be activated by different spoken
commands. If in doubt, try speaking a com-
mand or say Help.
●
When an action is taken (e.g., call a con-
tact), the voice control ends automatically
and you must activate it again if you want to
continue with it. There are certain commands
after which the voice control does not end,
and it waits by saying Next command?.
●
To manually end voice control, press and
hold the button until the corresponding
confirmation signal sounds, or briefly press
the button twice, or press the function but-
ton in the upper right corner of the screen.
●
You can also end the voice control by
speaking the following commands: Stop or
Cancel.
Voice control help
It is recommended to listen to the Help the
first time you use the voice control.
●
Activate voice control .
●
Say the command Help to start it in the lan-
guage indicated System Settings, and fol-
low the instructions in the dialogue. The Help
command can also be spoken followed by a
function of the infotainment system, such as
“Help with navigation”.
Interacting with the dialogue mode
Icons in upper left corner:
The system waits for a user's command.
The system has recognised a command
and will act shortly.
The system transmits a spoken com-
mand and confirms the command that
has been given.
The system is in paused mode. (max. 3
minutes).
Hide or show the voice control menu
›››
Fig. 183.
Operation during the dialogue
While the infotainment system transmits a
spoken instruction, the symbol will be dis-
played on the screen.
●
You can stop the speech by pressing the
upper left icon on the screen or button and
voice recognition will resume for the user.
IMPORTANT: The system will ONLY recog-
nize a command when the symbol is
displayed as “active” on the panel or on
the touchscreen.
/
If you make a mistake when speaking a com-
mand, or pronounce it incompletely and it
has no effect, you may repeat the command.
The symbol remains activated.
●
Briefly press button to repeat the com-
mand.
Voice control instructions
Follow the instructions shown below for opti-
mal operation of the voice control.
●
Speak slowly and clearly if possible. The
system will not recognise words that are un-
clearly pronounced, or words and numbers
that are missing syllables.
●
Telephone numbers should be spoken digit
by digit, or by blocks units, tens or hundreds.
●
Speak at a normal volume, without exag-
gerated pronunciation or long pauses.
●
Avoid outside and nearby noise (for exam-
ple, conversations inside the vehicle). Close
all doors, windows and the sliding sunroof.
●
Do not direct the air from the outlets to-
wards the roof of the passenger compart-
ment.
●
If you are driving at high speed, talk a little
louder.
By activating voice control the system takes
you to the main screen
›››
Fig. 183, which will
display the contexts in which the system op-
erates and the main commands.
176
Loading ...
Loading ...
Loading ...