Loading ...
Loading ...
Loading ...
Driving
●
After hooking up the trailer and connect-
ing the sock
et, check that all the trailer's
rear lights are working properly.
Note
●
If ther
e is any fault in the trailer
's lighting,
check the fuses on the instrument panel
›››
page 54.
●
The contact between the retainer cable
and the safety lug may give cause wear in
the lug. This wear does not stop it from op-
erating properly and is not a fault. It is ex-
cluded from the warranty.
●
When hitching and unhitching the trailer,
the vehicle's handbrake should be applied.
Retrofitting a towing bracket
Description
Fig. 307
Limits and attachment points for ret-
r
ofitting a t
o
wing br
ack
et.
SEAT recommends that towing brackets be
r
etr
ofitt
ed at a specialised w
orkshop
. For ex-
ample, it may very well be necessary to ad-
just the cooling system or mount thermal pro-
tection plates. SEAT recommends visiting a
SEAT dealership for this.
If a towing bracket is retrofitted, the distance
specifications should always be kept in mind.
The distance between the centre of the ball
head and the road
›››
Fig. 307
C
must never
be l
ess than that indicat
ed. This al
so applies
when the v
ehicl
e is fully loaded, including the
technically permissible maximum vertical
load on the coupling device.
Distance specifications
›››
Fig. 307:
Attachment points (lower part of the vehi-
cle)
65 mm (minimum)
350 mm to 420 mm (fully laden vehicle)
1040 mm
317 mm
319 mm (Leon) / 596 mm (Leon Sportour-
er ST)
WARNING
If the cables are improperly or incorrectly
connected, this may lead to malfunctions
in the entire v
ehicle electronic system, as
well as to accidents and serious injuries.
●
Never connect the trailer's electric sys-
tem to the electrical connections of the tail
lights or any other unsuitable power
A
B
C
D
E
F
320
Loading ...
Loading ...
Loading ...