Loading ...
Loading ...
Loading ...
Self-help
WARNING
Using the tyre mobility system can be dan-
gerous, especially when filling the tyre at
the roadside
. Please observe the following
rules to minimise the risk of injury:
●
Stop the vehicle safely as soon as possi-
ble. Park it at a safe distance from sur-
rounding traffic to fill the tyre.
●
Ensure the ground on which you park is
flat and solid.
●
All passengers and particularly children
must keep a safe distance from the work
area.
●
Turn on the hazard warning lights to warn
other road users.
●
Use the tyre mobility system only if you
are familiar with the necessary procedures.
Otherwise, you should seek professional
assistance.
●
The tyre mobility set is intended for tem-
porary emergency use only until you can
reach the nearest specialised workshop.
●
Replace the repaired tyre with the tyre
mobility set as soon as possible.
●
The sealant is a health hazard and must
be cleaned immediately if it comes into
contact with the skin.
●
Always keep the tyre mobility set out of
the reach of small children.
●
Always stop the engine, apply the hand
brake and put it in gear when using a man-
ual gearbox, in order to reduce the risk of
involuntary movement of the v
ehicle.
WARNING
A tyre filled with sealant does not have the
same perf
ormance properties as a conven-
tional t
yre.
●
Never drive faster than 80 km/h
(50 mph).
●
Avoid heavy acceleration, hard braking
and fast cornering.
●
Drive for only 10 minutes at a maximum
speed of 80 km/h (50 mph) and then check
the tyre.
For the sake of the environment
Dispose of used or expired sealant observ-
ing any legal requirements.
Note
A new bottle of sealant can be purchased
at SEAT dealerships.
Note
Take into account the separate instruction
manual of the tyre mobility set* manufac-
t
urer.
Anti-puncture kit contents*
Fig. 33
Standard representation: anti-punc-
t
ur
e kit cont
ents.
The anti-puncture kit is located underneath
the fl
oor co
v
ering in the luggage compart
-
ment. It includes the f
ollowing components
›››
Fig. 33:
Valve insert remover
A sticker to be adhered to the instrument
cluster, within the driver's visual field, to
remind that the maximum advisable
speed “max. 80 km/h” or “max. 50 mph”
Filler tube with cap
Air compressor
ON/OFF switch
Air bleed screw (it can also be integrated
in the inflator tube).
»
1
2
3
4
5
6
39
Loading ...
Loading ...
Loading ...