Loading ...
Loading ...
Loading ...
Driving
We recommend taking the vehicle to a speci-
alised w
orkshop t
o hav
e the f
ault r
epaired.
Trailer mode
On vehicles with a factory-fitted trailer hitch,
when the trailer is connected, the rear sen-
sors will not activ
ate when reverse gear is en-
gaged or button is pressed. Therefore, any
objects behind or to the side of the vehicle
will not be indicated on the screen and no
audio signals will sound.
The screen will only display objects detected
at the front, and the vehicle's trajectory will
be hidden.
Manoeuvre braking function*
3 Only valid with Parking System Plus
The emergency br
aking function is used to
minimise damage in the event of a collision.
Depending on the equipment, if the Parking
Aid is active, the braking while manoeuvring
function activates emergency braking when it
detects an obstacle in the vehicle’s path that
could cause a collision, driving forwards or in
reverse.
The function will not brake if the Parking Aid is
activated automatically. For the system to
operate, manoeuvring speed must be be-
tween 2.5 and 10 km/h (between 1.5 and 6
mph) for the front area and between 1.5 and
10 km/h (betw
een 1 and 6 mph) for the rear.
Following an intervention, the braking while
manoeuvring function will be inactive in the
same direction of travel for 5 metres. Once
the gear is changed, or the selector lever’s
position is changed, the function will be ac-
tive again. The Parking Aid’s limitations apply.
The manoeuvre braking function is set in the
Easy Connect system with button >
Vehicle > SETTINGS > Parking and ma-
noeuvring.
●
on – permits the use of the braking while
manoeuvring function.
●
off – does not permit the use of the
braking whil
e manoeuvring function.
Temporary suppression of emergency
braking
●
When the function is deactivated with the
Manoeuvre braking button that appears on
the Parking assist scr
een of the Easy Con-
nect system.
●
Whenever any of the car doors, rear lid or
bonnet are opened.
Rear parking aid*
Description
The rear parking aid is an audible assistant
that warns of obstacles l
ocated behind the
vehicle.
There are sensors integrated in the rear
bumper. When they detect an obstacle, you
are alerted by audible warnings and visually
on the Easy Connect system.
Make particularly sure that the sensors are
not covered by adhesives, residues, dirt and
the like, as this could affect the system's op-
eration. Cleaning instructions
›››
page 360.
The approximate measurement range of the
rear sensors is:
0.60 m
1.60 m
As you approach the obstacle, the frequency
of the audible signals will increase. The signal
will sound continuously at around 0.30 m:
Stop!
›››
in Introduction on page 300,
›
›
›
in Introduction on page 300!
If the separ
ation is maint
ained, the w
arning
v
olume is r
educed after about 4 seconds.
Side area:
Central area:
304
Loading ...
Loading ...
Loading ...