Loading ...
Loading ...
Loading ...
Help with parking and manoeuvring
CAUTION
The automatic connection of the Parking
Aid only works when you are driving slowly.
If driving st
yle is not adapted to the circum-
stances, an accident and serious injury or
damage may be caused.
Visual indication segments
Fig. 293
Parking Aid display on the Easy Con-
nect syst
em scr
een.
The optical indication of the segments works
as f
oll
o
ws:
Whit
e segments:
the obstacle is more
than approx. 30 cm away from the path
or in the direction opposite to travel.
They are also displayed when the elec-
tronic parking brake is activated.
–
Yellow segments: the obstacles lie on
the vehicle’s path and are at a distance
of less than approx. 30 cm away.
Red segments: obstacles are less than
approx. 30 cm away.
With the Media System Plus, Navi System or
Navi System Plus, yellow lines show the ex-
pected trajectory based on turns of the steer-
ing wheel.
If an obstacle is located in the vehicle’s way,
the corresponding audible warning will
sound.
When the penultimate segment is displayed,
the vehicle has reached the collision zone. In
the collision zone, the obstacles are repre-
sented in red, including those out of the path.
Stop the vehicle!
›››
in Introduction on
page 300,
›
›
›
in Introduction on
page 300 !
Setting the indications and audio
signal
s
The indications and audio signal settings are
in Easy Connect*
›
›
›
page 92
.
Aut
omatic activation
on – off.
–
–
Front volume*
Volume in the front and rear area.
Front sound settings/sharpness*
Sound tone in the front area.
Rear volume*
Volume in the rear area.
Rear sound settings/sharpness*
Sound tone in the rear area.
Adjust volume
When the parking aid is switched on, the vol-
ume of the audio source will be reduced, de-
pending on the selected option.
Error messages
If a an error or fault message appears on the
instrument panel in P
arking assist, ther
e is a
f
ault.
If the f
ault doesn'
t disappear before discon-
necting the ignition, it will not be indicated
next time the parking aid is connected.
If a rear sensor is faulty, only the obstacles in
the areas
A
and
B
are displayed
›
›
›
Fig. 290
. If a fr
ont sensor is faulty, only the
obstacles in the areas
C
and
D
will be dis-
pl
ayed. Symbol is displ
ayed.
»
303
Loading ...
Loading ...
Loading ...