Loading ...
Loading ...
Loading ...
Operation
CAUTION
When opening and closing in an emergen-
cy, carefully disassemble components and
then reassemble them car
efully to avoid
damage to the vehicle.
Emergency unlocking or locking of
the driver’s door
Fig. 101 Driver door handle: Concealed lock
cylinder
.
Fig. 102
Driver door handle: lever the cover off
If the central locking system should fail to op-
er
at
e
, the driv
er door can still be l
ocked and
unlocked by turning the key in the lock.
As a general rule, when the driver door is
locked manually all other doors are locked.
When it is unlocked manually, only the driver
door opens. Please observe the instructions
relating to the anti-theft alarm system
›››
page 107.
●
Unfold the vehicle key blade
›››
page 98.
●
Insert the key shaft into the lower opening in
the cover on the driver door handle
›››
Fig. 102 then remove the cover upwards.
●
Insert the key blade into the lock cylinder to
unlock or lock the vehicle.
Special characteristics
●
The anti-theft alarm will remain active
when vehicles are unlocked. However, the
alarm will not be triggered
›››
page 107.
●
After the driver door is opened, you have 15
seconds to switch on the ignition. Once this
time has elapsed, the alarm is triggered.
●
Switch the ignition on. The electronic immo-
bilizer recognises a valid vehicle key and de-
activates the anti-theft alarm system.
Note
The anti-theft alarm is not activated when
the vehicle is locked manually using the
k
ey shaft
›››
page 100.
Emergency lock of doors without
l
ock cylinders
Fig. 103
Locking the door manually.
110
Loading ...
Loading ...
Loading ...