Hikvision DS-K3G501SX User Manual

Loading ...

Oponal: Aer adding the device linkage, you can do one or more of the followings:

Edit Linkage

Sengs

Select the congured linkage sengs in the device list and you can edit its

event source parameters, including event source and linkage target.

Delete Linkage

Sengs

Select the congured linkage sengs in the device list and click Delete to

delete it.

7.8.3 Congure Device Acons for Card Swiping

You enable access control device's linkage acons (such as disarming a zone and triggering audio

prompt) for the swiping of a specic card, In this way, you can monitor the card holder's behaviors

and whereabouts.

Steps

Note

It should be supported by the device.

Click Access Control → Linkage Conguraon .

Select the access control device from the list on the le.

Click Add to add a new linkage.

Select Card Linkage as the event source.

Enter the card number or select the card from the drop-down list.

Select the card reader where the card swipes.

In the Linkage Target area, set the property target to enable this acon.

Buzzer on Controller

The audible warning of access control device will be triggered.

Buzzer on Reader

The audible warning of card reader will be triggered.

Capture

An event-related picture will be captured when the selected event happens.

Recording

An event-related picture will be captured when the selected event happens.

Note

The device should support recording.

Alarm Output

The alarm output will be triggered for nocaon.

Alarm Input

Arm or disarm the alarm input.

DS-K3G501SX Series Tripod Turnsle User Manual

Loading ...

Hikvision DS-K3G501SX Pro Tripod Turnstile