Hikvision DS-K3G501SX User Manual

Loading ...

Create a name for the metable.

Note

You can click the color icon beside the name to customize the color for the valid metable on

the me bar in the Conguraon Result area.

Select the metable type as general.

Select calculaon method.

First In & Last Out

The rst check-in me is recorded as start work me and the last check-out me is recorded

as the end-work me.

Each Check-In/Out

Each check-in me and check-out me is valid and the sum of all periods between adjacent

check-in and check-out me will be recorded as the valid working duraon.

You need to set Valid Authencaon Interval for this calculaon method. For example, if the

interval between card swiping of the same card is less than the set value, the card swiping is

invalid.

Oponal: Set Enable T&A Status switch to on to calculate according to aendance status of the

device.

Note

This funcon should be supported by the device.

Set the related aendance me parameters as the following:

Start/End-Work Time

Set the start-work me and end-work-me.

Valid Check-in/out Time

On the me bar, adjust the yellow bar to set the metable during which the check-in or

check-out is valid.

Calculated as

Set the duraon calculated as the actual work duraon.

Late/Early Leave Allowable

Set the metable for late or early leave.

Set absence related parameters.

Check-In, Late for

You can set the late me duraon for the employee who has checked in but is late for work. If

the employee exceeds the required me period, his/her aendance data will be marked as

absent.

Check-Out, Early Leave for

You can set the early leave me duraon for the employee who checks out earlier than the

normal leave me, and his/her aendance data will be marked as absent.

DS-K3G501SX Series Tripod Turnsle User Manual

Loading ...

Hikvision DS-K3G501SX Pro Tripod Turnstile