Hikvision DS-K3G501SX User Manual

Loading ...

Note

●

The duress code, super code, and dismiss code should be dierent.

●

The duress code, super password, and the dismiss code should be dierent from the

authencaon password.

●

The length of duress code, super password, and the dismiss code is according the device,

usually it should contains 4 to 8 digits.

Click OK.

Oponal: Click Copy to , and then select the door(s) to copy the parameters in the page to the

selected doors(s).

Note

The door's status duraon sengs will be copied to the selected door(s) as well.

Congure Parameters for Card Reader

Aer adding the access control device, you can congure its card reader parameters.

Steps

Click Access Control → Advanced Funcon → Device Parameter .

In the device list on the le, click to expand the door, select a card reader and you can edit the

card reader's parameters on the right.

Edit the card reader basic parameters in the Basic Informaon page.

Note

The displayed parameters may vary for dierent access control devices. There are part of

parameters listed as follows. Refer to the user manual of the device for more details.

Name

Edit the card reader name as desired.

Minimum Card Swiping Interval

If the interval between card swiping of the same card is less than the set value, the card

swiping is invalid. You can set it as 0 to 255.

Alarm of Max. Failed Aempts

Enable to report alarm when the card reading aempts reach the set value.

Card Reader Type/Card Reader Descripon

Get card reader type and descripon. They are read-only.

Oponal: Some of the following parameters are not listed in the Basic Informaon page, click

Advanced to edit the parameters.

Enable Card Reader

DS-K3G501SX Series Tripod Turnsle User Manual

Loading ...

Hikvision DS-K3G501SX Pro Tripod Turnstile