Hikvision DS-K3G501SX Pro Tripod Turnstile

User Manual - Page 37

For DS-K3G501SX.

PDF File Manual, 134 pages, Read Online | Download pdf file

DS-K3G501SX photo
Loading ...
Loading ...
Loading ...
Chapter 5 Device Sengs
You can also set the turnsle to passing mode and memory mode, pair the keyfob, inialize the
hardware, switching between RS-485 communicaon mode and RS-232 communicaon mode, and
view relay output NO/NC diagram by seng the DIP switch on the access control board.
Normal Mode: The device will work properly.
Passing Mode: There are 9 passing modes, including controlled bi-direcon, controlled entrance
and prohibited exit, controlled entrance and free exit, free bi-direcon, free entrance and
controlled exit, free entrance and prohibited exit, prohibited bi-direcon, prohibited entrance
and free exit.
Memory Mode: By default, the memory mode is enabled. When mulple cards are presented
and authencated, it allows mulple persons passing through the lane. When it counts the
passing people number is equal to the card presented mes, or no person passing through the
lane aer the last person passing, the barriers will be closed.
Note
You can also set the DIP switch on the access control board to control the entrance and exit
controlling type, keyfob pairing, etc. For details about the DIP switch value, see DIP Switch .
5.1 Pair Keyfob (Oponal)
Pair the remote control to the device through DIP switch to open/close the barrier remotely.
Before You Start
Ask our technique supports or sales and purchase the keyfob.
Steps
Note
Up to 32 keyfobs can be added to the turnsle.
You can set the keyfob to one-to-one mode or one-to-many mode via the DIP switch on the
keyfob. Here takes one-to-one mode as an example to explain. For one-to-many mode, see the
keyfob user manual.
One-to-One Mode
By default, the keyfob is in one-to-one mode. The keyfob's DIP switch is towards 1 (OFF). The
keyfob can control only one turnsle.
One-to-Many Mode
The keyfob's DIP switch is ON. In this mode, the keyfob can control mulple turnsles.
1.
Power o the turnsle.
2.
Set the No.4 switch of the DIP Switch on the access control board to the ON side.
DS-K3G501SX Series Tripod Turnsle User Manual
23
Loading ...
Loading ...
Loading ...