Loading ...
Loading ...
Loading ...
Appendix B. DIP Switch
B.1 DIP Switch Descripon
The DIP switch is on the access control board. No.1 to No 8 is from the low bit to the high bit.
When the switch is towards ON, it means the switch is enabled, otherwise, the switch is o. If you
set the DIP switch like the gure displayed below, its binary value is 00001100, and its decimal
value is 12.
B.2 DIP Switch Corresponded Funcons
The 8-bit DIP switch corresponded funcons on the access control board are as follows:
Bit Device Mode Funcon Decimal Value Binary Value
1 to 2 Work Mode Normal Mode 0
3 Memory Mode Enable Memory
Mode
0
Disable Memory
Mode
1
4 Keyfob Paring
Mode
Enable Keyfob
Paring Mode
1
Disable Keyfob
Paring Mode
0
DS-K3G501SX Series Tripod Turnsle User Manual
115
Loading ...
Loading ...
Loading ...