Hikvision DS-K3G501SX User Manual

Loading ...

Oponal: Enable Verify by Device to check whether the facial recognion device managed in

the client can recognize the face in the photo.

Conrm to add the person.

Click Add to add the person and close the Add Person window.

Click Add and New to add the person and connue to add other persons .

7.4.5 Take a Photo via Client

When adding a person, you can take a photo of the her/him via the client and set this photo as the

person's prole.

Before You Start

Make sure PC running the client has a camera or you have connected other USB camera to the PC.

Steps

Enter Person module.

Select an organizaon in the organizaon list to add the person and click Add to enter Add

Person window.

Note

Enter the person's basic informaon rst. For details, refer to Congure Basic Informaon .

Click Add Face in the Basic Informaon area.

Select Take Photo to enter Take Photo window.

Oponal: Enable Verify by Device to check whether the captured face photo can meet the

uploading requirements.

Take a photo.

1) Face to the camera and make sure your face is in the middle of the collecng window.

2) Click to capture a face photo.

3) Oponal: Click to capture again.

4) Click OK to save the captured photo.

DS-K3G501SX Series Tripod Turnsle User Manual

Loading ...

Hikvision DS-K3G501SX Pro Tripod Turnstile