Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/45671071-ds-k3g501sx/bg4f.png)
4.
Click OK.
5.
Oponal: Set the switch on the upper right corner to ON to trigger the alarm output.
Congure Parameters for Lane Controller
Aer adding the lane controller to the client, you can congure its parameters for passing through
the lane.
Steps
1.
Click Access Control → Advanced Funcon → Device Parameter to enter Parameter Sengs
page.
2.
In the device list on the le, select a lane controller and you can edit the lane controller's
parameters on the right.
3.
Edit the parameters.
Passing Mode
Select the controller which will control the barrier status of the device.
Note
You can select either According to Device's Passing Mode or According to Door's Schedule
Sengs.
●
If you select According to Device's Passing Mode, the device will follow the lane
controller's passing mode, which can be congured in remote control sengs page, to
control the barrier.
●
If you select According to Door's Schedule Sengs, the device will follow the sengs of
the soware to control the barrier.
Audible Prompt Duraon
Set how long the audio will last, which is played when an alarm is triggered .
Note
0 refers to the alarm audio will be played unl the alarm is ended.
Temperature Unit
Select the temperature unit that displayed in the device status.
Lightboard Brightness
Set the strip light brightness.
4.
Click OK.
7.7.2 Congure Remaining Open/Closed
You can set the status of the door as open or closed. For example, you can set the door remaining
closed in the holiday, and set the door remaining open in the specied period of the work day.
DS-K3G501SX Series Tripod Turnsle User Manual
65
Loading ...
Loading ...
Loading ...