Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/45671071-ds-k3g501sx/bg7a.png)
7.12.3 Edit Time
Steps
1.
Click Maintenance and Management → Device Management → Device to enter the device list.
2.
Click to enter the remote conguraon page.
3.
Click System → Time to congure the me zone.
4.
Oponal: Check Enable NTP and set the NTP server address, the NTP port, and the
synchronizaon interval.
5.
Oponal: Check Enable DST and set the DST start me, end me and the bias.
6.
Click Save.
7.12.4 Set System Maintenance
You can reboot the device remotely, restore the device to default sengs, etc.
Steps
1.
Click Maintenance and Management → Device Management → Device to enter the device list.
2.
Click to enter the remote conguraon page.
3.
Click System → System Maintenance .
4.
Maintain the device.
Reboot
The device starts reboong.
Restore Default Sengs
Restore the device sengs to the default ones, excluding the IP address.
Restore All
Restore the device parameters to the default ones. The device should be acvated aer
restoring.
5.
Remotely upgrade the device.
1) In the Remote Upgrade part, select an upgrade type.
Note
●
You need to set the device ID before upgrading if you select Controller Upgrade File as the
remote upgrade type.
●
Only the card reader that connected via RS-485 protocol supports upgrading.
2) Click ... to select an upgrade le.
3) Click Upgrade to start upgrading.
Note
Do not power o during the upgrading.
DS-K3G501SX Series Tripod Turnsle User Manual
108
Loading ...
Loading ...
Loading ...