Tripp Lite B093-004-2E4U-V Owner's Manual

Loading ...

2. Installation

2.2.2 Models with External Power Supplies

Some console servers use an external 12V wall-mount power supply (see 2.1 Models for model listing). These models include

a selection of wall socket adapters for each geographic region (North America, Europe, U.K., Japan and Australia). The power

supply unit’s 12V DC connector plugs into the 12V DC (PWR) power jack located on the side of the unit.

• Plug in the power supply AC power cable and the DC power cable.

• Turn on the unit and conﬁrm the Power LED (PWR) is illuminated.

2.3 Network Connection

All console server models include Ethernet ports.

Network connections are made using Cat5e patch cables (Tripp Lite N001 and N002 Series Cables, sold separately). Connect

the unit’s LAN port to an Ethernet network. Upon ﬁrst connecting and conﬁguring the console server to a network, you must

connect a computer to the console server’s primary network port.

Ensure you only connect the LAN port to an Ethernet network that supports 10/100, or 10/100/1000 (B098, B097, B093

only).

The B098 has four physical input ports which are logically presented as two ports (NET1 & NET2). Each logical port consists of

a copper 10/100/1000 port and a ﬁber-optic small form-factor pluggable (SFP) module slot.

On all devices with logically-paired SFP and RJ45 ports, you can use only one of the two physical ports at a time: either the

SFP module port or the 10/100/1000 port. The ﬁber-optic medium (ie, the SFP module) has priority over the copper medium

(ie the RJ45 port). Only if the SFP module is not plugged in, does the RJ45 copper link becomes active. This applies regardless

of the connection order. If the SFP module is plugged in after the copper medium has established a link, the copper link is

disconnected and the ﬁber-optic medium becomes active.

For the initial conﬁguration of the console server you must connect a computer to the console server’s principal network port.

This port is labeled LAN1 on B093 and NET1 on B098 and B097.

Loading ...

Tripp Lite B093-004-2E4U-V 4-Port Console Server with 4G LTE Cellular Gateway, Dual GbE NIC, 4Gb Flash and Dual SIM