Tripp Lite B093-004-2E4U-V Owner's Manual

Loading ...

215

Device Mode

For a device mode port, set the port type to either ups, rpc, or enviro:

# conﬁg -s conﬁg.ports.port5.device.type=[ups | rpc | enviro]

For port 5 as a UPS port:

# conﬁg -s conﬁg.ports.port5.mode=reserved

For port 5 as an RPC port:

# conﬁg -s conﬁg.ports.port5.mode=powerman

For port 5 as an Environmental port:

# conﬁg -s conﬁg.ports.port5.mode=reserved

SDT Mode

To enable access over SSH to a host connected to serial port 5:

# conﬁg -s conﬁg.ports.port5.mode=sdt

# conﬁg -s conﬁg.ports.port5.sdt.ssh=on

To conﬁgure a username and password when accessing this port with Username = user1 and Password = secret:

# conﬁg -s conﬁg.ports.port#.sdt.username=user1

# conﬁg -s conﬁg.ports.port#.sdt.password=secret

Terminal Server Mode

Enable a TTY login for a local terminal attached to serial port 5:

# conﬁg -s conﬁg.ports.port5.mode=terminal

# conﬁg -s conﬁg.ports.port5.terminal=[vt220 | vt102 | vt100 | linux | ansi]

The default terminal is vt220.

Serial Bridge Mode

Create a network connection to a remote serial port via RFC-2217 on port 5:

# conﬁg -s conﬁg.ports.port5.mode=bridge

Optional conﬁgurations for the network address of RFC-2217 server of 192.168.3.3 and TCP port used by the RFC-2217

service = 2500:

# conﬁg -s conﬁg.ports.port5.bridge.address=192.168.3.3

# conﬁg -s conﬁg.ports.port5.bridge.port=2500

To enable RFC-2217 access: # conﬁg -s conﬁg.ports.port5.bridge.rfc2217=on

To redirect the serial bridge over an SSH tunnel to the server: # conﬁg -s conﬁg.ports.port5.bridge.ssh.enabled=on

14. Conﬁguration from the Command Line

Loading ...

Tripp Lite B093-004-2E4U-V 4-Port Console Server with 4G LTE Cellular Gateway, Dual GbE NIC, 4Gb Flash and Dual SIM