Loading ...
Loading ...
Loading ...
47
Click Add Host to enable access to a new host (or select Edit to update the settings for existing host).
Enter the IP Address or DNS Name and a Host Name (up to 254 alphanumeric characters) for the new network-connected
host. You can optionally enter a Description.
Add or edit the Permitted Services (or TCP/UDP port numbers) authorized for controlling this host. Only these permitted
services will be forwarded by SDT to the host. All other services (TCP/UDP ports) will be blocked.
The Logging Level specifies the level of information to be logged and monitored for each host access (refer to 7. Alerts,
Auto-response and Logging for more information).
If the host is a PDU or UPS power device or a server with IPMI power control, then specify RPC (for IPMI and PDU) or UPS and
the Device Type. The Administrator can then configure these devices and enable which users have permissions to remotely
cycle power etc. (refer to 8. Remote Power Control for more information). Otherwise, leave the Device Type set to None.
If the console server has been configured with distributed Nagios monitoring enabled, you will also be presented with Nagios
Settings options to enable assigned services on the host to be monitored (refer to 10. Nagios Integration).
Click Apply. This will create the new host and create a new managed device with the same name.
4. Serial Port, Host, Device and User Configuration
Loading ...
Loading ...
Loading ...