Tripp Lite B093-004-2E4U-V Owner's Manual

Loading ...

139

7.5 Conﬁgure SMTP, SMS, SNMP and/or Nagios Service for

Alert Notiﬁcations

The auto-response facility enables remote alerts to be sent as Trigger and Resolve Actions. Before such alert notiﬁcations can

be sent, you must conﬁgure the assigned alert service.

7.5.1 Send Email Alerts

The console server uses SMTP (Simple Mail Transfer Protocol) for sending the email alert notiﬁcations. To use SMTP, the

Administrator must conﬁgure a valid SMTP server for sending the email:

• Select Alerts & Logging: SMTP & SMS.

• In the SMTP Server ﬁeld, enter the IP address of the outgoing mail Server.

• If this mail server uses a Secure Connection, specify its type. You may also specify the IP port to use for SMTP. The default

SMTP Port is 25.

• You may enter a Sender email address which will appear as the “from” address in all email notiﬁcations sent from this

console server. Many SMTP servers check the sender’s email address with the host domain name to verify the address as

authentic. It may be useful to assign an email address for the console server, such as [email protected].

• You may also enter a Username and Password if the SMTP server requires authentication.

• Similarly can specify the speciﬁc Subject Line that will be sent with the email.

• Click Apply to activate SMTP.

7. Alerts, Auto-Response and Logging

Loading ...

Tripp Lite B093-004-2E4U-V 4-Port Console Server with 4G LTE Cellular Gateway, Dual GbE NIC, 4Gb Flash and Dual SIM