Tripp Lite B093-004-2E4U-V Owner's Manual

Loading ...

123

The steps below show the establishment of an SSH tunneled connection to a network-connected device using the PuTTY client

software.

In the Session menu, enter the console server’s IP address in the Host Name or IP address ﬁeld.

• For dial-in connections, this IP address will be the Local address you assigned to the console server when you set it up as

the Dial-In PPP Server.

• For Internet (or local/VPN connections) connections, this will be the public IP address of the console server.

Select the SSH Protocol. The port will be set as 22.

Go to the SSH: Tunnels menu. In Add new forwarded port, enter any frequently unused port number for the source port

(e.g., 54321).

Set the Destination: IP details.

• If your destination device is network-connected to the console server using RDP, set the destination as <Managed Device

IP address/DNS Name>:3389. If when setting up the Managed Device as Network Host on the console server, you

speciﬁed its IP address to be 192.168.253.1 (or its DNS Name was accounts.myco.intranet.com), then specify the

destination as 192.168.523.1:3389 (or accounts.myco.intranet.com:3389 ). Only devices that have been conﬁgured

as networked hosts can be accessed using SSH tunneling (except by the “root” user who can tunnel to any IP address the

console server can route to).

6. SSH Tunnels and SDT Connector

Loading ...

Tripp Lite B093-004-2E4U-V 4-Port Console Server with 4G LTE Cellular Gateway, Dual GbE NIC, 4Gb Flash and Dual SIM