Tripp Lite B093-004-2E4U-V Owner's Manual

Loading ...

4. Serial Port, Host, Device and User Conﬁguration

To edit an existing device and add a new connection:

• Select Edit on the Serial & Network: Managed Devices and click Add Connection.

• Select the connection type for the new connection (Serial, Network Host, UPS or RPC). Then select the speciﬁc connection

from the presented list of conﬁgured unallocated hosts/ports/outlets.

To add a new network-connected managed device:

• The Administrator adds a new network-connected Managed Device using Add Host on the Serial & Network: Network

Host menu. This automatically creates a corresponding new managed device (refer to 4.4 Network Hosts)

• When adding a new network-connected RPC or UPS power device, you set up a Network Host, designate it as RPC or

UPS, then go to RPC Connections (or UPS Connections) to conﬁgure the relevant connection. Again corresponding

new Managed Device (with the same Name /Description as the RPC/UPS Host) is not created until this connection step is

completed (refer to 8. Power, Environment and Digital I/O).

Note: The outlet names on this newly created PDU are by default “Outlet 1” “Outlet 2”. When connecting a particular managed device that

draws power from the outlet, the outlet will take the name of the powered managed device.

To add a new serially connected managed device:

• Conﬁgure the serial port using the Serial & Network: Serial Port menu (refer to 4.1 Conﬁgure Serial Ports).

• Select Serial & Network: Managed Devices and click Add Device.

• Enter a Device Name and Description for the managed device.

• Click Add Connection. Select Serial and the Port that connects to the managed device.

• To add a UPS/RPC power connection, network connection or another serial connection, click Add Connection.

• Click Apply.

Loading ...

Tripp Lite B093-004-2E4U-V 4-Port Console Server with 4G LTE Cellular Gateway, Dual GbE NIC, 4Gb Flash and Dual SIM