Tripp Lite B093-004-2E4U-V Owner's Manual

Loading ...

For a server you may also need dh1024.pem (Difﬁe Hellman parameters). Refer to http://openvpn.net/easyrsa.html

for a guide on basic RSA key management. For alternative authentication methods, go to http://openvpn.net/index.php/

documentation/howto.html#auth. For more information, go to http://openvpn.net/howto.html.

• Select the Device Driver to be used, either Tun-IP or Tap-Ethernet. The TUN (network tunnel) and TAP (network tap)

drivers are virtual network drivers that support IP tunneling and Ethernet tunneling, respectively. TUN and TAP are part of the

Linux kernel.

• Select either UDP or TCP as the Protocol. UDP is the default and preferred protocol for OpenVPN.

• In Tunnel Settings, assign whether this is the Client or Server end of the tunnel. When running as a server, the advanced

console server supports multiple clients connecting to the VPN server over the same port.

• Check or uncheck the Compression button to enable or disable compression.

4.9.2 Conﬁgure as Server or Client

Complete the Client Details or Server Details, depending on the Tunnel Mode selected.

• If Client has been selected, the Primary Server Address will be the address of the OpenVPN Server.

• If Server has been selected, enter the IP Pool Network address and the IP Pool Network mask for the IP Pool. The network

deﬁned by the IP Pool Network address/mask is used to provide the addresses for connecting clients.

Click Apply to save changes.

4. Serial Port, Host, Device and User Conﬁguration

Loading ...

Tripp Lite B093-004-2E4U-V 4-Port Console Server with 4G LTE Cellular Gateway, Dual GbE NIC, 4Gb Flash and Dual SIM