Tripp Lite B093-004-2E4U-V Owner's Manual

Loading ...

182

10. Nagios Integration

10.2.1 Enable Nagios on the Console Server

Select System: Nagios on the console server management console and check the service Enabled checkbox.

Enter the Nagios Host Name the console server will be referred to in the Nagios central server. This will be generated from

local System Name (entered in System: Administration) if unspeciﬁed.

In Nagios Host Address, enter the IP address or DNS name the upstream Nagios server will use to reach the console server.

If unspeciﬁed, this will default to the ﬁrst network port’s IP (Network (1) as entered in System: IP).

In Nagios Server Address, enter the IP address or DNS name the console server will use to reach the upstream Nagios

monitoring server.

Check the Disable SDT Nagios Extensions option if you wish to disable the SDT connector integration with your Nagios

server at the head end. Only select this option if you want to run basic Nagios monitoring.

Otherwise, enter the IP address or DNS name the SDT Nagios clients will use to connect the console server in SDT Gateway

Address.

When NRPE and NSCA are both enabled, NSCA is the preferred method for communicating with the upstream Nagios server.

Make sure to check Prefer NRPE to use NRPE whenever possible (i.e., for all communication except for alerts).

Loading ...

Tripp Lite B093-004-2E4U-V 4-Port Console Server with 4G LTE Cellular Gateway, Dual GbE NIC, 4Gb Flash and Dual SIM