Tripp Lite B093-004-2E4U-V Owner's Manual

Loading ...

227

The following command will synchronize the live system with the new conﬁguration:

# conﬁg -a

14.1.15 SNMP

To set up the SNMP agent on the device:

# conﬁg -s conﬁg.system.snmp.protocol=[ UDP | TCP ]

# conﬁg -s conﬁg.system.snmp.trapport=’port number’ (default is 162)

# conﬁg -s conﬁg.system.snmp.address=’NMS IP network address’

# conﬁg -s conﬁg.system.snmp.commnity=’community name’ (v1 and v2c only)

# conﬁg -s conﬁg.system.snmp.engineid=’ID’ (v3 only)

# conﬁg -s conﬁg.system.snmp.username=’username’ (v3 only)

# conﬁg -s conﬁg.system.snmp.password=’password’ (v3 only)

# conﬁg -s conﬁg.system.snmp.version=[ 1 | 2c | 3 ]

The following command will synchronize the live system with the new conﬁguration:

# conﬁg -a

14.1.16 Administration

To change the administration settings to:

System Name og.mydomain.com

System Password (root account) secret

Description Device in ofﬁce 2

# conﬁg -s conﬁg.system.name=og.mydomain.com

# conﬁg -P conﬁg.users.user1.password (will prompt user for a password)

# conﬁg -s “conﬁg.system.location=Device in ofﬁce 2”

Note: The -P parameter will prompt the user for a password and encrypt it. The value of any conﬁg element can be encrypted using the -P

parameter, but only encrypted user passwords and system passwords are supported. If any other element value were to be encrypted, the

value will become inaccessible and must be reset.

An alternative to the second command above is:

# /etc/scripts/user-mod -P root

The following command will synchronize the live system with the new conﬁguration:

# conﬁg –a

14.1.17 IP Settings

To conﬁgure the primary network interface with static settings:

IP address 192.168.0.23

Netmask 255.255.255.0

Default gateway 192.168.0.1

DNS server 1 192.168.0.1

DNS server 2 192.168.0.2

# conﬁg -s conﬁg.interfaces.wan.address=192.168.0.23

# conﬁg -s conﬁg.interfaces.wan.netmask=255.255.255.0

# conﬁg -s conﬁg.interfaces.wan.gateway=192.168.0.1

# conﬁg -s conﬁg.interfaces.wan.dns1=192.168.0.1

# conﬁg -s conﬁg.interfaces.wan.dns2=192.168.0.2

# conﬁg -s conﬁg.interfaces.wan.mode=static

# conﬁg -s conﬁg.interfaces.wan.media=[ Auto | 100baseTx-FD | 100baseTx-HD | 10baseT-HD ] 10baseT-FD

To enable bridging between all interfaces:

# conﬁg -s conﬁg.system.bridge.enabled=on

To enable IPv6 for all interfaces:

# conﬁg -s conﬁg.system.ipv6.enabled=on

14. Conﬁguration from the Command Line

Loading ...

Tripp Lite B093-004-2E4U-V 4-Port Console Server with 4G LTE Cellular Gateway, Dual GbE NIC, 4Gb Flash and Dual SIM

Owner's Manual - Page 227