Tripp Lite B093-004-2E4U-V Owner's Manual

Loading ...

4. Serial Port, Host, Device and User Conﬁguration

Note: There are no speciﬁc limits on the number of users you can set up, nor on the number of users per serial port or host. Multiple users

(Users and Administrators) can control/monitor the one port or host. Similarly, there are no speciﬁc limits on the number of groups. Each

user can be a member of multiple groups (in which case, they assume the cumulative access privileges of each of those groups). A user

does not have to be a member of any groups. If the user is not a member of the default user group, then they will not be able to use the

management console to manage ports.

While there are no speciﬁc limits, the time to reconﬁgure does increase as the number and complexity increases. As such, the recommended

aggregate number of users and groups should be kept under 250.

The Administrator can also edit the access settings for any existing users:

• Select Serial & Network: Users & Groups and click Edit to modify the user access privileges.

• Alternately, click Delete to remove the user or click Disable to temporarily block any access privileges.

Note: For more information on enabling the SDT Connector so each user has secure tunneled remote RPD/VNC/Telnet/HHTP/HTTPS/SoL

access to the network-connected hosts, refer 6. SSH Tunnels and SDT Connector.

4.3 Authentication

Refer to Chapter 9.1 - Remote Authentication Conﬁguration for authentication conﬁguration details.

4.4 Network Hosts

To monitor and remotely access a locally networked computer or device (referred to as a host), you must identify the host and

specify the TCP or UDP ports/services that will be used to control that host:

Selecting Serial & Network: Network Hosts presents all the network-connected hosts that have been enabled for access, as

well as the related access TCP ports/services.

Loading ...

Tripp Lite B093-004-2E4U-V 4-Port Console Server with 4G LTE Cellular Gateway, Dual GbE NIC, 4Gb Flash and Dual SIM