Tripp Lite B093-004-2E4U-V Owner's Manual

Loading ...

138

7. Alerts, Auto-Response and Logging

7.3.6 Send Nagios Event

Click on Send Nagios Event as the Add Trigger Action. Enter a unique Action Name, and set the Action Delay Time.

Edit the Nagios Event Message text to display on the Nagios status screen for the service.

Specify the Nagios Event State (OK, Warning, Critical or Unknown) to return to Nagios for this service.

Click Save New Action.

Note: To notify the central Nagios server of Alerts, NSCA must be enabled under System: Nagios and Nagios must be enabled for each

applicable host or port.

7.3.7 Perform Interface Action

Click on Perform Interface Action as the Add Trigger Action. Enter a unique Action Name, and set the Action Delay

Time.

Select the Interface (Modem or VPN service) and the Action (Start or Stop Interface) to be taken. You may wish to start an

IPsec VPN service in response to an incoming SMS, or set up an OpenVPN tunnel whenever your Tripp Lite device fails over to

use the cellular connection.

Note: If any IPsec service or OpenVPN tunnel is to be controlled by the Network Interface Event Action, you will need to have checked the

Control by Auto-Response box when conﬁguring that service. If selected, the default state for the VPN tunnel / service will be down.

7.4 Resolve Actions

Actions can also be scheduled for when a trigger condition has been resolved:

• For an assigned auto-response with a deﬁned trigger check condition, click on Add Resolve Action (e.g., Send Email or

Run Custom Script) to select the action type to be taken.

Note: Resolve Actions are conﬁgured exactly the same as Trigger Actions, except the designated Resolve Actions are all executed on

resolution of the trigger condition and there are no Action Delay Times set.

Loading ...

Tripp Lite B093-004-2E4U-V 4-Port Console Server with 4G LTE Cellular Gateway, Dual GbE NIC, 4Gb Flash and Dual SIM