1. Home
  2. Tripp Lite
  3. Tripp Lite B093-004-2E4U-V User Manual
  4. Page 231

Tripp Lite B093-004-2E4U-V 4-Port Console Server with 4G LTE Cellular Gateway, Dual GbE NIC, 4Gb Flash and Dual SIM

Owner's Manual - Page 231

For B093-004-2E4U-V. Also, The document are for others Tripp Lite models: B093-00X-2E4U-X, B097-016/048, B098-016/048, B098-016-V

PDF File Manual, 285 pages, Read Online | Download pdf file

B093-004-2E4U-V photo
Loading ...
Loading ...
Loading ...
231
14.1.22 NAGIOS
To configure NAGIOS with the following settings:
NAGIOS host name b098-16 (Name of this system)
NAGIOS host address 192.168.0.1 (IP to find this device at)
NAGIOS server address 192.168.0.10 (upstream NAGIOS server)
Enable SDT for NAGIOS ext. Enabled
SDT gateway address 192.168.0.1 (defaults to host address)
Prefer NRPE over NSCA Disabled (defaults to Disabled)
# config -s config.system.nagios.enabled=on
# config -s config.system.nagios.name=b098-16
# config -s config.system.nagios.address=192.168.0.1
# config -s config.system.nagios.server.address=192.168.0.10
# config -s config.system.nagios.sdt.disabled=on (disables SDT for nagios extensions)
# config -s config.system.nagios.sdt.address=192.168.0.1
# config -s config.system.nagios.nrpe.prefer=’’
To configure NRPE with following settings:
NRPE port 5600 (port to listen on for nrpe. Defaults to 5666)
NRPE user user1 (User to run as. Defaults to nrpe)
NRPE group group1 (Group to run as. Defaults to nobody)
Allow command arguments Enabled
# config -s config.system.nagios.nrpe.enabled=on
# config -s config.system.nagios.nrpe.port=5600
# config -s config.system.nagios.user=user1
# config -s config.system.nagios.nrpe.group=group1
# config -s config.system.nagios.nrpe.cmdargs=on
To configure NSCA with the following settings:
NSCA encryption BLOWFISH (can be: [ None | XOR | DES | TRPLEDES | CAST-256 | BLOWFISH |
TWOFISH | RIJNDAEL-256 | SERPENT | GOST ]
NSCA password secret
NSCA check-in interval 5 minutes
NSCA port 5650 (defaults to 5667)
user to run as User1 (defaults to nsca)
group to run as Group1 (defaults to nobody)
# config -s config.system.nagios.nsca.enabled=on
# config -s config.system.nagios.nsca.encryption=BLOWFISH
# config -s config.system.nagios.nsca.secret=secret
# config -s config.system.nagios.nsca.interval=2
# config -s config.system.nagios.nsca.port=5650
# config -s config.system.nagios.nsca.user=User1
# config -s config.system.nagios.nsca.group=Group1
The following command will synchronize the live system with the new configuration:
# config –a
14. Configuration from the Command Line
Loading ...
Loading ...
Loading ...