Loading ...
Loading ...
Loading ...
219
14. Configuration from the Command Line
14.1.5 Network Hosts
To determine the total number of currently configured hosts:
# config -g config.sdt.hosts.total
Assume this value is equal to 3. If you add another host, make sure to increment the total number of hosts from 3 to 4:
# config -s config.sdt.hosts.total=4
If the output is config.sdt.hosts.total , assume 0 hosts are configured.
Add Power Device Host
To add a UPS/RPC network host with the following details:
IP address / DNS name 192.168.2.5
Host name remoteUPS
Description UPSroom3
Type UPS
Allowed services ssh port 22 and https port 443
Log level for services 0
Issue the commands below:
# config -s config.sdt.hosts.host4.address=192.168.2.5
# config -s config.sdt.hosts.host4.name=remoteUPS
# config -s config.sdt.hosts.host4.description=UPSroom3
# config -s config.sdt.hosts.host4.device.type=ups
# config -s config.sdt.hosts.host4.tcpports.tcpport1=22
# config -s config.sdt.hosts.host4.tcpports.tcpport1.loglevel=0
# config -s config.sdt.hosts.host4.udpports.udpport2=443
# config -s config.sdt.hosts.host4.udpports.udpport2.loglevel=0
The loglevel can have a value of 0 or 1.
The default services that should be configured are: 22/tcp (ssh), 23/tcp (telnet), 80/tcp (http), 443/tcp (https), 1494/tcp
(ica), 3389/tcp (rdp), 5900/tcp (vnc)
Add Other Network Host
To add any other type of network host with the following details:
IP address / DNS name 192.168.3.10
Host name OfficePC
Description MyPC
Allowed services ssh port 22,https port 443
log level for services 1
Issue the commands below. If the host is not a PDU or UPS power device, or a server with IPMI power control, leave the device
type blank:
# config -s config.sdt.hosts.host4.address=192.168.3.10
# config -s config.sdt.hosts.host4.description=MyPC
# config -s config.sdt.hosts.host4.name=OfficePC
# config -s config.sdt.hosts.host4.device.type=’’ (leave this value blank)
# config -s config.sdt.hosts.host4.tcpports.tcpport1=22
# config -s config.sdt.hosts.host4.tcpports.tcpport1.loglevel=1
# config -s config.sdt.hosts.host4.udpports.tcppport2=443
# config -s config.sdt.hosts.host4.udpports.tcpport2.loglevel=1
To add the new host as a managed device, make sure to use the current total number of managed devices + 1, for the new
device number.
To get the current number of managed devices:
# config -g config.devices.total
Loading ...
Loading ...
Loading ...