Tripp Lite B093-004-2E4U-V 4-Port Console Server with 4G LTE Cellular Gateway, Dual GbE NIC, 4Gb Flash and Dual SIM

Owner's Manual - Page 65

For B093-004-2E4U-V. Also, The document are for others Tripp Lite models: B093-00X-2E4U-X, B097-016/048, B098-016/048, B098-016-V

PDF File Manual, 285 pages, Read Online | Download pdf file

B093-004-2E4U-V photo
Loading ...
Loading ...
Loading ...
65
• Once established, the OpenVPN icon will display a message notifying the successful connection and assigned IP. This
information, as well as the time the connection was established, is available anytime by scrolling over the OpenVPN icon.
Note: An alternate OpenVPN Windows client can be downloaded from http://www.openvpn.net/index.php/openvpn-client/downloads.html.
Refer to http://www.openvpn.net/index.php/openvpn-client/howto-openvpn-client.html for help.
4.10 PPTP VPN
Console servers with firmware version 3.5.2 and later include a PPTP (Point-to-Point Tunneling Protocol) server. PPTP is
typically used for communications over a physical or virtual serial link. The PPP endpoints define a virtual IP address to
themselves. Routes to networks can then be defined with these IP addresses as the gateway, which results in traffic being
sent across the tunnel. PPTP establishes a tunnel between the physical PPP endpoints and securely transports data across the
tunnel.
The strength of PPTP is its ease of configuration and integration into existing Microsoft infrastructure. It is generally used for
connecting single remote Windows clients. If you take your portable computer on a business trip, you can dial a local number
to connect to your Internet access service provider (ISP) and then create a second connection (tunnel) into your office network
across the Internet and have the same access to your corporate network as if you were connected directly from your office.
Similarly, telecommuters also set up a VPN tunnel over their cable modem or DSL links to their local ISP.
To set up a PPTP connection from a remote Windows client to your Tripp Lite console server and local network:
1. Enable and configure the PPTP VPN server on your Tripp Lite console server.
2. Set up VPN user accounts on the Tripp Lite console server and enable the appropriate authentication.
3. Configure the VPN clients at the remote sites. The client does not require special software as the PPTP Server supports the
standard PPTP client software included with Windows NT and later.
4. Connect to the remote VPN.
4. Serial Port, Host, Device and User Configuration
Loading ...
Loading ...
Loading ...