Tripp Lite B093-004-2E4U-V Owner's Manual

Loading ...

3. System Conﬁguration

3.3 Network Conﬁguration

Enter an IP address for the principal Ethernet (LAN/Network/Network1) port on the console server, or enable its DHCP client so

that it automatically obtains an IP address from a DHCP server on the network it is to be connected to.

On the System: IP menu, select the Network Interface page, then check DHCP or Static for the Conﬁguration Method.

If you selected Static, you must manually enter the new IP Address, Subnet Mask, Gateway and DNS server details. This

selection automatically disables the DHCP client.

By default, the console server LAN port auto-detects the Ethernet connection speed. However, you can use the Media menu

to lock the Ethernet to 10 Mb/s or 100Mb/s and to Full Duplex (FD) or Half Duplex (HD).

Note: If you encounter packet loss or poor network performance with the default auto-negotiation setting, try manually setting the Ethernet

Media settings on the console server and the device it is connected to. In most cases, select 100baseTx-FD (100 megabits, full duplex).

Make sure both sides are set identically.

If you selected DHCP, the console server will search for conﬁguration details from a DHCP server. This selection automatically

disables any static address. The console server MAC address can be found on a label on the base plate

Note: In its factory default state (with no conﬁguration method selected), the console server has its DHCP client enabled, so it automatically

accepts any network IP address assigned by a DHCP server on your network. In this initial state, the console server will then respond to both

its Static address (192.168.0.1) and its newly assigned DHCP address.

You may also enter a secondary address or comma-separated list of addresses in CIDR notation, e.g. 192.168.1.1/24 as an

IP Alias.

Note: If you have changed the console server IP address, you may need to reconﬁgure your computer so it has an IP address that is in the

same network range as this new address (as detailed in an earlier note in this section).

Click Apply.

You will need to reconnect the browser on the computer that is connected to the console server by entering

http://new IP address.

Loading ...

Tripp Lite B093-004-2E4U-V 4-Port Console Server with 4G LTE Cellular Gateway, Dual GbE NIC, 4Gb Flash and Dual SIM