Loading ...
Loading ...
Loading ...
User Guide 722
Configuring Access Security Access Security Configurations
Step 4 ip http max-users
admin-num
operator-num poweruser-num user-num
Specify the maximum number of users that are allowed to connect to the HTTP server. The
total number of users should be no more than 16.
admin-num
: Enter the maximum number of users whose access level is Admin. The valid values
are from 1 to 16.
operator-num
: Enter the maximum number of users whose access level is Operator. The valid
values are from 0 to 15.
poweruser-num
: Enter the maximum number of users whose access level is Power User. The
valid values are from 0 to 15.
user-num
: Enter the maximum number of users whose access level is User. The valid values
are from 0 to 15.
Step 5 show ip http configuration
Verify the configuration information of the HTTP server, including status, session timeout,
access-control, max-user number and the idle-timeout, etc.
Step 6 end
Return to privileged EXEC mode.
Step 7 copy running-config startup-config
Save the settings in the configuration file.
The following example shows how to set the session timeout as 9, set the maximum
admin number as 6, and set the maximum operator number as 2, the maximum power user
number as 2, the maximum user number as 2.
Switch#configure
Switch(config)#ip http server
Switch(config)#ip http session timeout 9
Switch(config)#ip http max-user 6 2 2 2
Switch(config)#show ip http configuration
HTTP Status: Enabled
HTTP Port: 80
HTTP Session Timeout: 9
HTTP User Limitation: Enabled
HTTP Max Users as Admin: 6
HTTP Max Users as Operator: 2
HTTP Max Users as Power User: 2
HTTP Max Users as User: 2
Switch(config)#end
Loading ...
Loading ...
Loading ...