Loading ...
Loading ...
Loading ...
User Guide 662
Configuring QoS Bandwidth Control Configuration
Egress Rate (0-
1,000,000Kbps)
Specify the upper rate limit for sending packets on the port.
The rate ranges from 1 to 1000000 kbps for the gigaport and 1 to 100000 kbps
for the fast port, and is rounded off to the nearest multiple of 64. 0 means the
egress rate limit is disabled.
2) Click Apply.
3.1.2 Configuring Storm Control
Choose the menu QoS > Bandwidth Control > Storm Control to load the following page.
Figure 3-2 Configuring Storm Control
Follow these steps to configure the Storm Control function:
1) Select the desired port and configure the upper rate limit for forwarding broadcast
packets, multicast packets and UL-frames (Unknown unicast frames).
Rate Mode Specify the Rate Mode for the broadcast threshold, multicast threshold and UL-
Frame threshold on the desired port.
kbps: The switch will limit the maximum speed of the specific kinds of traffic in
kilo-bits per second.
ratio: The switch will limit the percentage of bandwidth utilization for specific
kinds of traffic.
pps: The switch will limit the maximum number of packets per second for specific
kinds of traffic.
Note: pps is only available on certain devices.
Loading ...
Loading ...
Loading ...