TP-Link TL-SG2428P | Jetstream 24 Port Gigabit Smart Managed PoE Switch | 24 PoE+ Ports @250W, 4 SFP Slots | Omada SDN Integrated | PoE Recovery | IPv6 | Static Routing | Limited Lifetime Protection

User Manual - Page 639

For TL-SG2428P.

PDF File Manual, 1146 pages, Download pdf file

Loading ...
Loading ...
Loading ...
User Guide 610
Configuring DHCP Service Configuration Examples
Switch#show ip dhcp l2relay information interface gigabitEthernet 1/0/1
Interface Option 82 Status Operation Strategy Format Circuit ID ...
--------- ---------------- ------------------ ------- --------- ...
Gi1/0/2 Enable Replace Normal Group2 ...
5.5.4 Configuring the DHCP Server
Note:
Make sure the DHCP server supports Option82 and more than one DHCP address pool.
To make sure the DHCP server can reach the computers, you can create static routes or enable
dynamic routing protocol like RIP on the DHCP server.
In this section, we use different notations to distinguish ASCII strings from hexadecimal
numbers. An ASCII string is enclosed with quotation marks, such as “123”, while a hexadecimal
number is divided by colon into parts of two digits, such as 31:32:33.
On the DHCP server, you need to create two DHCP classes to identify the Option 82
payloads of DHCP request packets from Group 1 and Group 2, respectively.
In this example, the DHCP relay agent uses the customized circuit ID and default remote ID
in TLV format. According to packet format described in Table 1-1 and Table 1-2, the sub-
options of the two groups are as shown in the following table.
Table 5-2 Sub-options of Group1 and Group 2
Group Sub-option Type (Hex) Length (Hex) Value
1
Circuit ID 00 06
“Group1” as an ASCII string (or
47:72:6F:75:70:31 in hexadecimal)
Remote ID 00 06 00:00:FF:FF:27:12
2
Circuit ID 00 06
“Group2” as an ASCII string (or
47:72:6F:75:70:32 in hexadecimal)
Remote ID 00 06 00:00:FF:FF:27:12
The configuration file /etc/dhcpd.conf of the Linux ISC DHCP Server is:
ddns-update-style interim;
ignore client-updates;
# Create two classes to match the pattern of Option82 in DHCP request packets from
# Group1 and Group 2, respectively.
# The agent circuit ID inserted by the DHCP relay switch is 8 byte long in TLV format, one
# byte for Type, one byte for Length, and 6 bytes for Value. Therefore, the offset is 2 and the
length is 6.
Loading ...
Loading ...
Loading ...