Loading ...
Loading ...
Loading ...
Configuring OAM (Only for Certain Devices) Ethernet OAM Configurations
User Guide 1001
Step 6 end
Return to privileged EXEC mode.
Step 7 copy running-config startup-config
Save the settings in the configuration file.
The following example shows how to enable OAM and configure the OAM mode as passive
on port 1/0/1.
Switch#configure
Switch(config)#interface gigabitEthernet 1/0/1
Switch(config-if)#ethernet-oam
Switch(config-if)#ethernet-oam mode passive
Switch(config-if)#show ethernet-oam configuration interface gigabitEthernet 1/0/1
Gi1/0/1
-----------------------------------------------------------
OAM : Enabled
Mode : Passive
...
Switch(config-if)#end
Switch#copy running-config startup-config
2.2.2 Configuring Link Monitoring
With Link Monitoring, the following link events can be reported: Error Symbol Period, Error
Frame, Error Frame Period, Error Frame Seconds.
â– Configuring Error Symbol Period Event
An Error Symbol Period event occurs if the number of symbol errors exceeds the defined
threshold within a specific period of time.
Follow these steps to configure the Error Symbol Period event:
Step 1 configure
Enter global configuration mode.
Step 2 interface {fastEthernet
port
| range fastEthernet
port-list
| gigabitEthernet
port
| range
gigabitEthernet
port-list
| ten-gigabitEthernet
port
| range ten-gigabitEthernet
port-list
}
Enter interface configuration mode.
Loading ...
Loading ...
Loading ...