TL-SG2428P User Manual

Loading ...

Notification Configurations

User Guide 1063

Configuring SNMP & RMON

■ Enabling the DDM Traps Globally

Note:

DDM Traps are only available on certain devices. To check whether your device supports this feature,

refer to the actual web interface.

Step 1 configure

Enter Global Configuration Mode.

Step 2 snmp-server traps ddm [ temperature | voltage | bias_current | tx_power | rx_power ]

Enable the corresponding DDM traps. DDM function is used to monitor the status of the

SFP modules inserted into the SFP ports on the switch. The command without parameter

enables all SNMP DDM traps. By default, all DDM traps are disabled.

temperature: Monitors the temperature of SFP modules inserted into the SFP ports on the

switch. The trap can be triggered when the temperature of any SFP module has reached the

warning or alarm threshold.

voltage: Monitors the voltage of SFP modules inserted into the SFP ports on the switch. The

trap can be triggered when the voltage of any SFP module has reached the warning or alarm

threshold.

bias_current: Monitors the bias current of SFP modules inserted into the SFP ports on the

switch. The trap can be triggered when the bias current of any SFP module has reached the

warning or alarm threshold.

tx_power: Monitors the TX Power of SFP modules inserted into the SFP ports on the switch.

The trap can be triggered when the TX Power of any SFP module has reached the warning

or alarm threshold.

rx_power: Monitors the RX Power of SFP modules inserted into the SFP ports on the switch.

The trap can be triggered when the RX Power of any SFP module has reached the warning

or alarm threshold.

Step 3 end

Return to Privileged EXEC Mode.

Step 4 copy running-config startup-config

Save the settings in the configuration file.

The following example shows how to configure the switch to enable DDM temperature trap:

Switch#configure

Switch(config)#snmp-server traps ddm temperature

Switch(config)#end

Switch#copy running-config startup-config

■ Enabling the VLAN Traps Globally

Step 1 configure

Enter Global Configuration Mode.

Loading ...

TP-Link TL-SG2428P | Jetstream 24 Port Gigabit Smart Managed PoE Switch | 24 PoE+ Ports @250W, 4 SFP Slots | Omada SDN Integrated | PoE Recovery | IPv6 | Static Routing | Limited Lifetime Protection