Loading ...
Loading ...
Loading ...
User Guide 566
Configuring DHCP Service DHCP Relay Configuration
Remote ID
Customization
Enable or disable Remote ID Customization. Enable it if you want to manually
configure the remote ID. Otherwise, the switch uses its own MAC address as the
remote ID.
Remote ID Enter the customized remote ID with up to 64 characters. The remote ID
configurations of the switch and the DHCP server should be compatible with each
other.
3) Click Apply.
3.1.2 Configuring DHCP Interface Relay
DHCP Interface Relay allows clients to obtain IP addresses from a DHCP server in a
different subnet.
Choose the menu L3 FEATURES > DHCP Service > DHCP Relay > DHCP Interface Relay
and click to load the following page.
Figure 3-2 Configuring DHCP Interface Relay
Select the interface type and enter the interface ID, then enter the IP address of the DHCP
server. Click Create.
Interface ID Specify the type and ID of the interface. It is the Layer 3 interface which is connecting
to the DHCP clients.
The interface should be an existing Layer 3 interface.
Server Address Enter the IP address of the DHCP server.
3.1.3 Configuring DHCP VLAN Relay
DHCP VLAN Relay allows clients in different VLANs to obtain IP addresses from a DHCP
server using the IP address of a single agent interface. It is often used when the relay
switch does not support configuring multiple Layer 3 interfaces.
Loading ...
Loading ...
Loading ...